Abstract
Recovering autonomous underwater vehicles (AUVs) by a mobile platform is a complex challenge. Traditional docking stations require strict pose deviation from the underwater vehicle. To overcome this issue, we propose a novel solution: an in-situ fluid-driven soft dock. This system comprises three soft robotic manipulators that possess guiding, capturing, and securing functionalities, respectively. We present the design, fabrication, and control methods for each manipulator considering the requirements of underwater docking operations. The theoretically allowable docking pose deviation range during AUV docking is analyzed. Additionally, the required force of soft grippers was evaluated through simulation and equivalent experimental tests. To enable dynamic recovery of AUVs while the soft robotic manipulators remain mobile on the experimental platform, we introduce a hydraulic control method based on attitude and pressure feedback. The test results indicate that the designed soft manipulators can operate and maintain good sealing performance under an external pressure of no less than 11 MPa. Moreover, the soft dock successfully recovered and secured AUVs of two different diameters in 20 dynamic tests, achieving a 90% success rate with a maximum AUV velocity of 1.6 m/s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
