Abstract
Small multirotor vehicles, for example, designed for package delivery, are expected to operate in close proximity to populated areas, raising concerns about noise pollution. This study utilizes acoustic flight tests and computational modeling of an instrumented research hexacopter developed at Penn State to investigate noise generation during takeoff and landing maneuvers, considering varying flight path angles and vehicle speeds. Flight tests were conducted at Mid-State Regional Airport and corresponding predictions were made using the Penn State Noise Prediction System. The predicted vehicle states and noise levels are first validated against the flight test data. The validated model and flight test data are then utilized to study the noise emissions of the aircraft. Measurements and predictions of the acoustic characteristics of the vehicle are analyzed using conventional noise metrics, frequency content, and directivity features. Descent maneuvers are found to be noisier than climb maneuvers. Noise generation decreases with an increase in forward speed during both climb and descent and also with an increase in vertical speed during climb. However, during descent, noise generation increases with an increase in sink rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.