Abstract
The Inconel 690 alloy is widely used in the manufacturing of nuclear equipment, such as pipe welding for steam generators (SG) and pressure vessels, due to its excellent high-temperature strength, corrosion resistance, and thermal stability. However, coarse grains have been observed in the welded joint of Inconel 690. Considering its crucial role as a structural material under high pressure, temperature, and corrosive conditions, improvements should be made to the microstructure of the welded joint. The ultrasonic-assisted gas tungsten arc welding (UA-GTAW) was used in Inconel 690 welding. The influence of ultrasonic vibration on the microstructure and mechanical properties of welded joints was studied. The results show that the ultrasonic refined the microstructure further to improve the mechanical properties. The UA-GTAW sample performed superiorities over regular GTAW joint in multi perspective including refined solidification grains, less element segregation, higher tensile strength and hardness. The Yield strength, ultimate tensile strength, and elongation increased from 320 MPa, 591 MPa, and 25.1 % to 387 MPa, 672 MPa, and 31.6 %, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
