Ultrashallow Junction Formation and Gate Activation in Deep-Submicron CMOS

Abstract

AbstractThis paper addresses the optimization of ion implantation and rapid thermal annealing for the fabrication of shallow junctions and the activation of polycrystalline silicon gates in deepsubmicron CMOS transistors. Achieving ultrashallow, low-resistance junctions was studied by combining low-energy B and As implantation with spike annealing. In addition, experiments using B doping marker superlattices were performed to identify the critical physical effects underlying dopant activation and diffusion. The combination of high ramp rates (∼100 °C/s) and ∼1 s cycles at temperatures as high as 1100 °C can be used to improve dopant activation without inducing significant thermal diffusion after TED has completed. MOS capacitors were used to identify the implantation and annealing conditions needed for adequate activation of the gate electrode. In comparison to the conventional recrystallized amorphous Si gates, it was found that fine-grained poly-Si allows for the use of lower processing temperatures or shorter annealing times while improving the gate activation level. The fine-grained crystal structure enhances the de-activation of B dopants in PMOS gates during the thermal treatments following gate activation. Yet, the resulting dopant loss stays within acceptable limits as verified by excellent 0.18 μm device performance. The feasibility of spike annealing and poly-Si gate materials for 100-nm technology was proven by full integration using gate lengths down to 80 nm.