Abstract
ABSTRACTCircular ultra‐high‐molecular‐weight polyethylene (UHMWPE) of 60 and 140 μm particle size, to ensure the homogenous mixing, was used as filler materials for developing the polypropylene (PP) and polyamide 6 (PA6)‐based composite specimens to investigate the effect of UHMWPE on reducing the noise, if the composites are used in car interior. PP composite containing 5 wt % UHMWPE of 60 μm particle size showed the lowest in‐plane friction coefficient (0.18 ± 0.01), improved Izod impact strength (33 ± 2.9 J/m2), and considerable tensile properties (37 ± 1.5 MPa of strength and 21 ± 1.1% of elongation at break), indicating its promise as low‐noise and durable material to be used in the car interior. Although PA6 composites showed decreasing friction coefficients with increasing UHMWPE content, their tensile and impact properties became poor or inconsistent, maybe due to the incompatibility of nonpolar UHMWPE with polar PA, and the large difference of their melting temperatures. The extent of compatibility of PP and PA6 with the UHMWPE has been investigated by analyzing the morphology (using scanning electron microscope) and the thermal properties of the composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48720.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.