Research on the process of preparing fiber filtration membrane by centrifugal blowing electrospinning technology

Abstract

AbstractCurrently, the problem of air pollution is getting more and more serious, especially the pollution of tiny solid particles (PM, particulate matter) in the air, which poses a great challenge to the environment and human health. Therefore, it is particularly important to develop air filtration materials with high filtration efficiency and low resistance to meet this challenge. In this study, we propose to prepare air filtration membranes by centrifugal jet electrospinning technology, design multifactorial orthogonal coupling experiments, and investigate the effects of key process parameters of centrifugal jet electrostatic spinning, including solution concentration, airflow rate, rotational speed, and voltage, on the fiber diameter and uniformity by applying the polar analysis of variance and analysis of variance. PAN‐BaTiO3 electret nanofiber filtration membranes with high efficiency and low resistance were prepared by combining the optimized process of centrifugal blowing electrospinning. Various characterization methods (tensile test, water contact angle test, surface charge test, filtration test) were used to evaluate the effect of different BaTiO3 electret contents (0%, 0.1%, 0.5%, 1%) on the comprehensive performance of the filtration membranes, and the electret filtration efficiency of the electret filtration membranes prepared by the present process reached as high as 96.56% with a pressure drop of 29 Pa.