Abstract
Effluent arriving from the Mondi Kraft paper mill at Piet Retief, South Africa, was filtered through tubular poly(ether sulphone) (PES) ultrafiltration membranes under constant pressure cross-flow conditions. The effluent that was fed into the membranes and permeate produced during filtration were characterised by UV–VIS light-spectroscopy. Substances that absorbed onto membranes during filtration caused changes to the permeability characteristics of the membranes. Changes in membrane performance were monitored by pure-water and product flux (pf) measurements. A colourimetric staining technique was developed to determine the nature of foulants adsorbed onto the membranes. Membrane cleaning solutions were subsequently selected using information obtained from the characterisation studies. In addition, the anti-fouling potential of non-covalently attached coating materials was investigated as a possible membrane pretreatment technique. Results showed that foulants present in the effluent are of phenolic and hydrophobic nature. Increasing the hydrophilic characteristics of membranes prior to filtration could reduce the amount of organic foulants that adsorbed onto the membranes. Membrane pretreatment not only reduced fouling, but also improved the effectiveness of cleaning methods. Membranes were effectively cleaned by a combination of mechanical and chemical cleaning techniques.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
