Abstract
AlCoCrCuFeNi high entropy alloy (HEA) coatings were formed on AZ91-Mg substrates using a two-step laser cladding technique that was adopted to solve the HEA melting problem due to the large difference in their melting temperatures. First, a layer composed of partially melted HEA powders in an AZ91 Mg matrix was produced, i.e. a composite layer, followed by laser cladding on the composite layer surface. The results showed that the top layer of the coating had a bcc solid solution structure and no intermetallic compound was detected. The dilution behaviour and the reactions between the HEA powder and the matrix were studied. In the composite layer, the Cu from the HEA powder was the main element that entered into the substrate melt, however, no serious dilution occurred. The solidification reactions at the HEA powder surface were determined using the corresponding Mg-Al-Cu phase diagrams that were constructed based on the CALPHAD approach.
Highlights
To overcome the inherently low corrosion and wear resistance of Mg-alloys, various surface coating methods and processes have been explored
Over the years, much interest has been focused on the development of improved protective coatings for magnesium alloys with the aims of expanding the application range of Mg alloys as well as to meet the demands of the manufacturing industry
The severe dilution problem that often occurs in forming protective coatings on Mg alloys using laser cladding can results in a high Mg level in the coating and this can impair the resistance of the coating to corrosion
Summary
To overcome the inherently low corrosion and wear resistance of Mg-alloys, various surface coating methods and processes have been explored. The severe dilution problem that often occurs in forming protective coatings on Mg alloys using laser cladding can results in a high Mg level in the coating and this can impair the resistance of the coating to corrosion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Metallurgical & Materials Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.