Turbulent velocity and pressure fluctuations in gas turbine combustor exit flows

Abstract

This paper presents the results of two test programmes using novel instrumentation to characterise the pressure and turbulent velocity fields in gas-turbine combustor exit flows. The probes are uncooled, therefore a fast-insertion traverse system is employed to prevent thermal degradation of the instrumentation in these severely hostile high-temperature environments. High-bandwidth ultra-miniature pressure transducers are used to measure unsteady total pressure, whilst a Pitot tube is employed to measure time-averaged total pressure. The probes are 4 mm in diameter with a measurement bandwidth of the order of 100 kHz. In the first test programme, the probes are used to characterise the streamwise turbulent velocity field approximately two axial chords downstream of an uncooled single-stage turbine in a turbojet engine. Established data reduction methods and calibration against a hot-wire are used to obtain turbulent velocity fluctuations from unsteady total pressure measurements. Comprehensive turbulence results are presented including time-histories, power spectra, intensities, and lengthscales obtained at four-engine conditions and at two radial and two circumferential measurement locations. In the second test programme the probes are demonstrated in an industrial combustor rig, featuring a can combustor with swirler nozzle and no dilution holes, at temperatures up to 1500 K. Static pressure fluctuations are obtained up to 100 kHz, and some typical combustor spectral features are identified.