Abstract

When a one-dimensional (1D) metal array is coupled to a planar metal mirror with a dielectric gap, localized plasmon resonance is excited inside the gap at a specific polarization of light in free space. Herein, we report on the completely polarized, mid-infrared thermal radiation that is released from gap plasmon resonators with a nanometer-thick dielectric. We fabricated nanogap plasmon resonators with 1D Au or Ni array of various widths (w) using laser interference lithography. An atomic layer deposition process was used to introduce a 10 nm-thick alumina gap between a 1D metal array and a planar metal mirror. It was observed that only for the Au nanogap plasmon resonators, high-amplitude absorption peaks that were attributed to gap plasmon modes with different orders appeared at discrete wavelengths in a polarization-resolved spectrum. In addition, all the pronounced peaks were gradually redshifted with increasing w. At w = 1.2-1.6 µm, the fundamental gap plasmon mode was tuned to the main wavelengths (8-9 µm) of thermal radiation at room temperature (e.g., ∼300 K), which led to polarization-selective camouflage against standard infrared thermal imaging. The results of electromagnetic simulations quantitatively agreed with the measured absorbance spectra in both peak wavelength and amplitude. We believe that these experimental efforts towards achieving radiation/absorption spectra tailored at mid-infrared wavelengths will be further exploited in thermal-radiation harnessed energy devices, spectroscopic sensors, and radiative coolers.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.