Tung oil-based coatings towards sustainable paper packaging materials

Abstract

Nowadays, the dependence on synthetic plastic-based materials for the preservation and transport of different types of products is very high, leading to major environmental and human health concerns, which highlights the importance of investigating sustainable options. Paper is a widely used bio-based material for packaging however, the development of newer and straightforward approaches to produce paper-based materials with increased functionalities and performance is still highly desired. In this work, we report the use of a bio-based photopolymerizable coating formulation, composed of tung oil, and using Darocur 1173 as photoinitiator, to develop functional papers with hydrophobic and improved water barrier properties, without compromising other properties. Coated paper samples were prepared, using different irradiation times (0, 15, 30, 60, and 300 s), to study the effect of this parameter on the properties of the coated papers. The ensuing coated papers presented pick-up values between 6 and 7 g/m2. Their hydrophobicity was significantly improved as evidenced by the increase in the contact angle values from about 71° to 127° and the significant decrease in the water absorption, measured by the Cobb test, from 108 down to 17 g/m2, upon a curing time of only 15 s. Furthermore, with this time of curing, the optical (viz. whiteness, brightness, and opacity) and mechanical properties (viz. tensile and burst strength) of paper were not affected. These results highlight the great potential of tung oil photopolymerizable coating formulations as a simple and promising alternative for the fabrication of more sustainable and functional paper packaging materials.