True Single-Piece Flow Case Hardening for In-Line Manufacturing

Abstract

Abstract Case hardening by carburizing is the most common heat treatment in mass production, which relies on atmosphere, or vacuum carburizing followed by oil or gas quenching and finally by tempering. Parts being heat-treated undergo the process in a configuration of a batch consists of hundreds or even thousands pieces. Under these circumstances, individual parts can’t help but be exposed to different process parameters in terms of temperature, atmosphere and quenching depends on their position within the batch. Parts near the outer portion of the load see a more rapid rise in temperature, are first exposed to the carburizing atmosphere and are more effectively quenched than parts located in the center of the batch. This can lead to significant variation from part to part and load to load; the resultant effective case depth deviation can be as high as 50%. Similarly, during quenching from hardening temperature distortion becomes highly unpredictable and unrepeatable. Modern industry demands greater precision and repeatability of results beyond those achievable by so-called traditional batch or continuous technologies and their associated equipment. Elimination of batches and focus on individual parts is the only true way to advance the industry. The article will introduce the first operational system for truly single-piece flow method for case hardening by low-pressure carburizing and hardening by high-pressure gas quench. The system treats each part individually and as such provides virtually identical process parameters, which results in extremely accurate and repeatable results. Quenching one part at a time in a specially design chamber, achieves more precise control and significantly reduces distortion so as to all make it possible to avoid post heat treatment hard machining operations. This single-piece flow heat treatment method is easily adapted into manufacturing and can be directly integrated into in-line manufacturing operations, working directly with machining centers. Materials handling and logistical issues are eliminated thus saving time and reducing unit cost. The results achieved on series of automotive gears will be reported and demonstrate incredible accuracy and repeatability, while significantly reducing distortion. Productivity and process costs prove the system to be highly competitive with other technologies. These proven advantages and savings.