Abstract
Poly (lactic acid), PLA, is a biodegradable thermoplastic that can be produced from renewable resources. The polymer is of interest for production of films for packaging applications. However, plasticization of PLA is required in order to obtain films with sufficient flexibility. PLA was blended with tributyl citrate (TbC) and two oligomers of TbC that were synthesized by transesterification of tributyl citrate (TbC) and diethylene glycol (DEG). Dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) were used to investigate the dynamic mechanical and thermal properties of the blends. All the plasticizers investigated decreased the glass transition temperature of PLA, and the reduction was the largest with the plasticizer having the lowest molecular weight. The PLA matrix became saturated with plasticizer at a certain concentration and phase separation occurred; the higher the molecular weight of the plasticizer, the lower the saturation concentration. Aging of the blends at room temperature for several months induced partial phase separation in the material. It was observed that the morphological stability of the blends was enhanced when the plasticizer concentration was reasonably low, i.e. 10–15 wt%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
