Abstract
An ultrahigh vacuum tribotester equipped with Auger electron analyzer and mass spectrometer is used to study the friction and wear behavior of amorphous carbon coated magnetic thin film rigid disks. The tests include continuous sliding of Al 2O 3-TiC sliders against lubricated and unlubricated polished and textured disks. Operating environment is found to play an important role in the tribological performance of the carbon overcoat. Wear lives were longest in dry nitrogen and argon environments as compared with ambient environment (with oxygen and water vapor), in agreement with some of the previously reported results. The wear lives of the carbon coatings in vacuum were inferior to those in other environments. In comparison, surface roughness and lubrication play a less significant role in friction and wear for the disks tested. Based on this study, we conclude that poor wear life in vacuum results from intimate slider-to-disk contact. The long life in dry Ar and nitrogen as compared with Ar+O 2 and ambient environment, results from the absence of tribochemical oxidation prevalent in the oxidizing environment.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call