Treatment planning optimization for multiple arcs stereotactic radiosurgery using a linear accelerator

Abstract

Purpose : Multiarc stereotactic radiosurgery is a technique used to irradiate an intracranial tumor with minimal damage to the surrounding normal tissue. The purpose of this paper is to present a method for and the results from optimizing three dimensional (3D) treatmetn dose for multiarc stereotactic radiosurgery. Methods and materials : The normal procedure for a physician-phycisist team designing a treatment plan for multiarc stereotactic radiosurgery is the trial-and-error approach of changing the collimator size and the isocenter of radiation by viewing the isodose curves on a two dimensional (2D) computed tomography (CT) or magnetic resonacne imaging (MRI) image plane. Not only is this time consuming, but the resulting treatment plan is not optimal in most, if not all, cases. One reason for such nonconformal isodose curves is that the same collimator size is used for all arcs. However, it is very difficult to determien manually the different collimator sizes for different arcs. A derivative free optimization is used to optimize the collimator size for each arc, as well as the 3D coordinates of the isocenter(s). Results : One spherical and two elipsoidal artificial tumors, and one actual tumor, were used to show the utilities of teh optimization process. The 90% isodose ruves resulting from optimization conform very well with the tumor; whereas the 90% isodose curves from the conventional method either do not enelop the entire tumor when the collimator size is too small, or a large volume of normal tissue is also irradiated by the 90% dose when the next larger collimator size is used. Conclusion : When the collimator size for each arc and the location of the isocenter(s) are optimized in a multiarc stereotactic surgery treatment plan, the 90% isodose curve conforms to the tumor much better than when the same collimator size is used for all arcs.