Abstract
The present work describes the application of a Fenton's reagent pretreatment combined with an aerobic biological process to remove the olive mill wastewater (OMW) pollutant load. Wastewater treatment was monitored by means of global parameters directly related to the concentration of organic compounds in OMW effluents: chemical oxygen demand (COD) and total phenolic content (TP). The biologic treatment itself allowed conversions from 67 to 83% of COD and 55 to 61% of TP. In the Fenton's reagent process a fixed H2O2/COD ratio of 0.20, a pH = 3.5 and a H2O2/Fe2+ molar ratio of 15 were defined as optimal conditions to treat the OMW. For an initial COD load of 92.5 g/L−1) the Fenton reagent-biologic combined process allowed a global removal of 80.7% COD and 93.7% TP. A kinetic study was performed resorting to the Grau model. The application of this model allowed observing an increase in the kinetic constant of the combined process (kFB = 24.7 g/L−1 day) when compared to the single aerobic process (kB = 19.4 g/L−1 day).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Environmental Science and Health, Part A
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
