Transient photoconductivity responses in amorphous In-Ga-Zn-O films

Abstract

We studied the photoconductivity responses in amorphous In-Ga-Zn-O (a-IGZO) films using a time-resolved microwave photoconductivity decay (μ-PCD) technique. The a-IGZO film characteristics are correlated with three components in the photoconductivity response: the peak value and two decay constants. The peak value originated from the density of the photo-generated free carriers through carrier generation and recombination processes during laser pulse irradiation. Power law characteristics indicated that the peak values are attributed to recombination process related to the exponential distribution of the conduction band tail states. After the laser pulse was turned off, the reflectivity signal decreased rapidly, indicating fast recombination of the photo-generated carriers. This fast decay component is suggested to be related to the recombination processes through the deep level states. Following the fast decay, a slow decay with a decay constant on the order of microseconds appeared. This slow decay was attributed to the reemission of trapped carriers with an activation energy of ∼0.2 eV. In addition, both the fast and slow decays for the wet annealed a-IGZO film were longer than those of the as-deposited a-IGZO film. The decay constants are considered to reflect the density of the subgap states that act as trapping or recombination centers. The μ-PCD method provides a useful estimation of the film quality, such as the density of the defect states, and the physical properties of electronic devices using a-IGZO films.