Transient mode-III problem of the elastic matrix with a line inclusion

Abstract

The method of pull-out test has been used to identify the mechanical performance of hybrid and fiber-reinforced composite materials. This paper investigates the elastic phase preceding the pull-out of a rigid line inclusion from the polymer matrix with fixed top and bottom surfaces. The mode-III problem is investigated such that the pull-out force is applied from the out-of-plane direction and it can be either transient or static. By applying the singular integral equation technique, the semi-analytical elastic field expressions are obtained. Under the static pull-out force, the stress intensity factor (SIF) near the inclusion tip shows a monotonic increase as the length and height of the matrix increase, whereas for the transient pull-out force, the SIF displays an initial increasing and followed by a decline. The maximum SIF is obtained for (1) the matrix length is 2 to 2.5 times of the inclusion length, and (2) the matrix height is 1 to 2 times of the inclusion length. Moreover, this paper provides a solution approach that incorporates the elasticity of the inclusion, showing that there is an optimal shear stiffness that minimizes the stress singularity of system. The conclusions of this study hold significance for the design and performance evaluation of fiber-reinforced composite materials.