Transformation of acetaminophen in solution containing both peroxymonosulfate and chlorine: Performance, mechanism, and disinfection by-product formation

Abstract

With the fast development of peroxymonosulfate (PMS)-dominating processes in drinking water and wastewater treatment, residual PMS is easy to come across chlorine as these processes are usually followed by secondary chlorine disinfection. The synergistic effect of PMS and chlorine on the degradation of micro-organic pollutants is investigated by selecting acetaminophen (ACT) as a reference compound for the first time in this study. Unlike conventional PMS or chlorine activation which generates reactive species such as hydroxyl radical (HO•), sulfate radical (SO4•−), chlorine radical (Cl•), and singlet oxygen (1O2), the efficient ACT removal is attributed to the direct catalytic chlorination by PMS due to the significantly enhanced consumption of chlorine along with negligible change of PMS concentration at neutral condition, and the same reaction pathways in both PMS/chlorine and chlorine processes. The kinetic study demonstrates that ACT oxidation by PMS/chlorine follows second order reaction, and the degradation efficiency can be promoted at alkaline conditions with peak rate constants at pH 9.0−10.0. The presence of chloride can enhance the removal of ACT, while ammonium and humic acid significantly retard ACT degradation. Higher formation of selected disinfection by-products (DBPs) is observed in the PMS/chlorine process than in the sole chlorination. This study highlights the important role of PMS in organic pollutants degradation and DBPs formation during the chlorination process.