Abstract
As methane is the major component of natural gas and non-conventional gases as biogas or mine gases, its energy content has to be measured accurately regardless of its production site for fiscal trading of transported and distributed natural gas. The determination of calorific value of fuel gases with the lowest uncertainty can only be performed by direct method with a reference gas calorimeter. To address this point, LNE developed a few years ago an isoperibolic reference gas calorimeter according to the Rossini’s principle. The energy content Hs of methane of purity 99.9995% has been measured to 55 507.996 kJ kg−1 (890.485 kJ mol−1) with an expanded relative uncertainty of 0.091% (coverage factor k = 2.101 providing a level of confidence of approximately 95%). These results are based on ten repeated measurements and on the uncertainty assessment performed in accordance with the guide to the expression of uncertainty in measurement (GUM). The experimental setup and the results are reported here and for the first time, the fully detailed uncertainty calculation is exposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.