Abstract

This research was aimed at obtaining a first estimation of the effect of turbulent vortices present in the relay nozzle jets of an air jet loom on the weft. To this end a large eddy simulation (LES) model was set up and validated capable of simulating a highly underexpanded jet up to a point sufficiently far from the nozzle exit such that flow features at the weft location could be analyzed. The quality of the LES was evaluated based on several quality criteria as well as by comparing the results with experiments and data from the literature. The results show that for a free jet substantial velocity fluctuations are present at a representative yarn location. By inserting a rigid cylinder at this location, the corresponding force fluctuations on a smooth yarn were also obtained. The research shows that the unsteadiness in the jet is quite substantial, as are the corresponding force fluctuations. These fluctuations could have a profound impact on the yarn motion and should at least be considered when using numerical tools to evaluate the forces on or the motion of a yarn acted on by a relay nozzle jet.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call