Abstract
High-conducting and long-term stable proton-conducting electrolytes are of utmost importance. This study investigates the synthesis and characterization of BaCe0.7Zr0.1CuxY0.2-xO3-δ (BCZCuxY; x = 0, 0.005, 0.01, 0.02, 0.05, and 0.1) electrolytes tailored for proton-conducting solid oxide fuel cells (SOFCs). Through Cu2+ doping at the B-site of BaCe0.7Zr0.1Y0.2O3-δ (BCZY), a successful reduction of the sintering temperature to 1200 °C was achieved. BCZCu0.02Y exhibited a high relative density of approx. 98.1% at this temperature, but beyond 2 mol% Cu doping, the appearance of a BaCuO2 secondary phase adversely impacted conductivity. The electronic properties of BCZY and BCZCuxY are elucidated via partial density of states (PDOS) analysis, revealing optimized crystal structures and band gap reductions (from approx. 1.9 eV–1.1 eV) upon Cu doping. Notably, BCZCu0.02Y demonstrated a commendable conductivity, with values of 3.5 × 10−2 S. cm−1 in air and 4.8 × 10−2 S. cm−1 in a moist atmosphere at 750 °C. Remarkably, excellent electrochemical stability was observed in a moist hydrogen atmosphere for up to 450 h at 600 °C. Single cells incorporating BCZCu0.02Y electrolytes exhibited peak power densities of 380 mW/cm2 at 750 °C. The incorporation of 2 mol% Cu2+ in the BCZY lattice holds promise for achieving low-temperature sintering and high-performance proton-conducting SOFCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.