Abstract

Spray drift is inevitable in chemical applications, drawing global attention because of its potential environmental pollution and the risk of exposing bystanders to pesticides. This issue has become more pronounced with a growing consensus on the need for enhanced environmental safeguards in agricultural practices. Traditionally, spray drift measurements, crucial for refining spray techniques, relied on intricate, time-consuming, and labor-intensive sampling methods utilizing passive collectors. In this study, we investigated the feasibility of using close-range remote sensing technology based on Light Detection and Ranging (LiDAR) point clouds to implement drift measurements and drift reduction classification. The results show that LiDAR-based point clouds vividly depict the spatial dispersion and movement of droplets within the vertical plane. The capability of LiDAR to accurately determine drift deposition was demonstrated, evident from the high R2 values of 0.847, 0.748 and 0.860 achieved for indoor, wind tunnel and field environments, respectively. Droplets smaller than 100 μm and with a density below 50 deposits·cm−2·s−1 posed challenges for LiDAR detection. To address these challenges, the use of multichannel LiDAR with higher wavelengths presents a potential solution, warranting further exploration. Furthermore, we found a satisfactory consistency when comparing the drift reduction classification calculated from LiDAR measurements with those obtained though passive collectors, both in indoor tests and the unmanned air-assisted sprayer (UAAS) field test. However, in environments with less dense clouds of larger droplets, a contradiction emerged between higher drift deposition and lower scanned droplet counts, potentially leading to deviations in the calculated drift potential reduction percentage (DPRP). This was exemplified in a field test using an unmanned aerial vehicle sprayer (UAVS). Our findings provide valuable insights into the monitoring and quantification of pesticide drift at close range using LiDAR technology, paving the way for more precise and efficient drift assessment methodologies.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call