Abstract

Nanomaterials with ultrahigh specific surface areas are promising adsorbents for water-pollutants such as dyes and heavy metal ions. However, an ongoing challenge is that the dispersed nanomaterials can easily flow into the water stream and induce secondary pollution. To address this challenge, we employed nanomaterials to bridge hydrogel networks to form a nanocomposite hydrogel as an alternative water-pollutant adsorbent. While most of the existing hydrogels that are used to treat wastewater are weak and non-healable, we present a tough TiO2 nanocomposite hydrogel that can be activated by ultraviolet (UV) light to demonstrate highly efficient self-healing, heavy metal adsorption, and repeatable dye degradation. The high toughness of the nanocomposite hydrogel is induced by the sequential detachment of polymer chains from the nanoparticle crosslinkers to dissipate the stored strain energy within the polymer network. The self-healing behavior is enabled by the UV-assisted rebinding of the reversible bonds between the polymer chains and nanoparticle surfaces. Also, the UV-induced free radicals on the TiO2 nanoparticle can facilitate the binding of heavy metal ions and repeated degradation of dye molecules. We expect this self-healable, photo-responsive, tough hydrogel to open various avenues for resilient and reusable wastewater treatment materials.

Highlights

  • Wastewater with high concentrations of heavy metal ions or dye molecules has been a ubiquitous problem for environmental sustainability and human health [1,2,3,4,5]

  • Dye molecules or heavy metal ions may transit to highly toxic products in drinking water systems, causing allergy, dermatitis, skin irritations, or even provoking cancer and mutation in humans [6,7,8,9]

  • We present a tough and self-healable nanocomposite hydrogel that can be activated by ultraviolet (UV) light to efficiently adsorb heavy metal ions and degrade dye molecules in wastewater

Read more

Summary

Introduction

Wastewater with high concentrations of heavy metal ions or dye molecules has been a ubiquitous problem for environmental sustainability and human health [1,2,3,4,5]. Various methods have been used to treat wastewater, such as adsorption, electrochemical treatment, chemical precipitation, ion exchange, extraction, and filtration [5,14]. Among these methods, the adsorption method is considered as one of the best technologies because the adsorption process is generally effective, convenient, energy-efficient, and inexpensive [3,15,16]. Exiting studies showed that nanomaterials with ultrahigh specific surface areas are promising water-pollutant adsorbents [17,18,19,20]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call