Total Fatigue Life Estimation of Notched Structural Components Using Low‐Cycle Fatigue Properties

Abstract

Abstract: In this investigation, an efficient fatigue life computation method under variable amplitude loading of structural components has been proposed. Attention in this study is focused on total fatigue life estimation of aircraft structural components. Flat specimens with central hole made of quenched and tempered steel 13H11N2V2MF were tested as representatives of different structural components. Total fatigue life of these specimens, defined as sum of fatigue crack initiation and crack growth life, was experimentally determined. Specimens were tested by blocks of positive variable amplitude loading. Crack initiation life was computed using theory of low‐cycle fatigue (LCF) properties. Cyclic stress–strain curve, Masing’s curve and approximate Sonsino’s curve were used for determining stress–strain response at critical point of considered specimens. Computation of crack initiation life was realised using Palmgren–Miner’s linear rule of damage accumulation, applied on Morrow’s curves of LCF properties. Crack growth life was predicted using strain energy density method. In this method, the same LCF properties were used for crack initiation life and for crack growth life computations also. Computation results are compared with own experimentally obtained results.