Torsion and Combined Torsion-Axial Load Behaviour of Concrete Filled Steel Tube Columns with and without ECC/CFRP Wrap

Abstract

ABSTRACT Concrete-filled tube columns may experience coupled torsion and axial compression under seismic and wind loading. Fifteen square, rectangular, and circular concrete filled steel/aluminium tube (CFST/CFAT) are tested under pure torsion to understand the behaviour and develop/validate finite element (FE) models. Parametric studies under pure torsion are conducted using FE models to study the effect of geometric (tube cross-section, length, and thickness) and tube/concrete material parameters on torsional strength, stiffness, and tube-concrete composite interaction. FE models are used to study strength, stiffness, and failure modes of CFST columns under combined torsion and axial compression load at various preload levels of axial and torsion. Coupled torsional preloading and subsequent axial load reduce the axial load capacity significantly, while coupled axial preloading and subsequent torsional loading have shown no significant influence on the torsional strength of CFST columns. Implementation of FE models developed for CFST columns with engineered cementitious composite (ECC) and carbon fibre reinforced polymer (CFRP) wraps showed significant enhancement of axial strength and stiffness compared to control (without wrap) even under high torsional preload level. The energy absorption capacity and ductility of the CFRP wrapped CFST column are about 1.38 and 1.1 times higher than its counterpart with ECC wrap of same axial load capacity. Overall, the results suggest that use of both CFRP and ECC wrap is an effective approach to enhance the torsional behaviour and ductility of CFST columns under combined torsion and axial loading conditions. However, high crack resistance and better post-peak ductility of ECC wrapped CFST compared to sudden CFRP rupture failure in CFRP-wrapped counterpart should be taken into consideration for seismic applications.