Abstract
Abstract The fairway located in Lancaster County, PA, consisted primarily of perennial ryegrass (80%) and creeping bentgrass (50%). Treatment plots were 7 X 6 ft, arranged in a RCB design and replicated 3 times. Liquid formulations were applied by using a CO2 sprayer with 4 8004VS TeeJet nozzles mounted on a 6-ft boom, operating at 28 psi, and delivering 4 gal/1000 ft2. At the 1st treatment time (4 Jun), the following soil and environmental conditions existed: air temperature, 68° F; soil temperature at 1-inch depth, 64° F; soil temperature at 2-inch depth, 62° F; RH, 67%; amount of thatch, 0.125 inch; soil type, silt loam; soil particle size analysis: 30.7% sand, 61.9% silt, 7.4% clay; soil moisture (oven baked), 28.3%; organic matter, 5.6%; water pH, 7.0; soil pH, 6.1; time of treatment, mid-morning; and overcast skies. The experimental area was irrigated with 0.25 inch of water 3 fir after treatment. At the 2nd treatment time (15 Jul), the following soil and environmental conditions existed: air temperature, 78° F; soil temperature at 1-inch depth, 74° F; soil temperature at 2-inch depth, 75° F; RH, 75%; amount of thatch, 0.0625-0.125 inch; soil type; silt loam; soil particle size analysis: 30.7% sand, 61.9% silt, 7.4% clay; soil moisture (oven baked), 37.7%; organic matter, 7.2%; water pH, 7.0; soil pH, 5.9; time of treatment, mid-morning; and cloudy skies. The experimental area was irrigated with 0.25 inch of water immediately after product dried. A the 3rd treatment time (12 Aug), the following soil and environmental conditions existed: air temperature, 65° F; soil temperature at 1-inch depth, 69° F; soil temperature at 2-inch depth, 69° F; RH, 90%; amount of thatch, 0.0625-0.125 inch; soil type, silt loam; soil particle size analysis: 30.7% sand, 61.9% silt, 7.4% clay; soil moisture (oven baked), 40.0%; organic matter, 5.7%; water pH, 7.0; soil pH, 6.5; time of treatment, early morning; and cloudy skies. The experimental area was irrigated with 0.25 inch of water immediately after product dried. Post-treatment counts were made on 29 Aug. The total number of green of June beetle larvae flushed to the surface following an application of Sevin SL over a 24-hr observation interval was recorded from each replicate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
