Abstract

Abstract Treatment plots were 6X10 ft, arranged in a RCB design and replicated 4 times. Liquid formulations were applied by using a CO2 compressed-air sprayer with 4 8002VS TeeJet nozzles mounted on a 6-ft boom, operating at 28 psi, and applied in 625 ml of water/60 ft2 or delivering 2.7 gal/1,000 ft2. Granular formulations were applied with a hand-held shaker and mixed with fine top-dressing sand to facilitate product distribution. At the 1st treatment time (10 Jul), the following soil and environmental conditions existed: air temperature, 70° F; soil temperature at 1-inch depth, 65° F; soil temperature at 2-inch depth, 63° F; RH, 90%; amount of thatch, 0.0625 inch; soil textural class, sandy loam; soil particle size analysis: 57.7% sand, 30.0% silt, 12.3% clay; soil percent water content (percent by weight), 19.3% organic matter, 4.5%; water pH, 7.0; soil pH, 6.7; time of application, early morning; and cloudy skies. At the 2nd treatment time (24 Jul), the following soil and environmental conditions existed: air temperature, 59° F; soil temperature at 1-inch depth, 58° F; soil temperature at 2-inch depth, 62° F; RH, 95%; amount of thatch, 0.0625 inch; soil textured class, sandy loam; soil particle size analysis: 61.3% sand, 27.7% silt, 11.0% clay; soil percent water content (percent by weight), 24.2%; organic matter, 5.2%; water pH, 7.0; soil pH, 6.8; time of application, early morning; and overcast skies. At the 3rd treatment time (30 Jul), the following soil and environmental conditions existed: air temperature, 63° F; soil temperature at 1-inch depth, 62° F; soil temperature at 2-inch depth, 60° F; RH, 18%; amount of thatch, 0.0625 inch; soil textural class, sandy loam; soil particle size analysis: 60.8% sand, 29.0% silt, 10.2% clay; soil percent water content (percent by weight), 19.1 %; organic matter, 5.0%; water pH, 7.0; soil pH, 7.0; time of application, early morning; and clear skies. The area was irrigated with 0.3 inch of water immediately following application after each treatment time. The experimental area was artificially infested with second- and third-instar BCW larvae on 5 Aug. A total of 11.0 inches of rain or irrigation was recorded from Jul 10 through Aug 14. The entire experimental area was covered with bird netting until posttreatment counts were recorded on 8 Aug. Efficacy data were recorded 3 days (8 Aug), 6 days (11 Aug), and 9 days (14 Aug) after infesting the experimental area with BCW larvae by counting the number of larvae flushed to the surface within a 1.0-yd2 wood frame sampling area using a soap irritant drench of 30 ml Lemon Joy™ dishwashing detergent in 2 gal of water.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call