Abstract
Nanocrystalline TiO2 thin films were prepared by sol-gel method and were then used to fabricate metal-semiconductor-metal ultraviolet photodetectors with Au Schottky contact. It was found that dark current of the fabricated devices was only 1.9nA at 5V applied bias. High responsivity of 199A∕W was achieved when it was irradiated by the ultraviolet light (λ=260nm). The low dark current and high responsivity maybe attributed to the effect of Schottky barrier in company with neutral semiconductor owing to the wide finger gap of 20μm. The devices show a slow time response with a rise time of 6s and a decay time of 15s. The authors deduced that the slow time response was caused by defect traps which were widely distributed in nanocrysal.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
