Abstract
In this paper, we propose a low-disturbance and fast terahertz (THz) near-field intensity distribution imaging method. The THz detector is fabricated using an oriented multiwalled carbon nanotube (CNT) thin film and a LiNbO3(LN) crystal to the thin film is attached. The CNT absorbs and converts THz waves into heat, and the birefringence change of the LN crystal owing to the heat is used. The birefringence change was measured with high sensitivity using a dual-polarizer configuration of a uniform polarizer and a polarization CMOS image sensor. The fabricated THz detector is a low-disturbance method because it does not use metal, and it can measure the THz distribution in the plane all at once, which is faster than the antenna scanning method. Using the proposed method, we have successfully imaged the THz near-field intensity distribution emitted from an impact avalanche and transit time diode oscillating at 0.278 THz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.