Abstract
Subsurface damage (SSD) induced during conventional manufacturing of optics contributes mainly to a reduction in the performance and quality of optics. In this paper, we propose the application of full-field optical coherence tomography (FF-OCT) as a high-resolution and nondestructive method for evaluation of SSD in optical substrates. Both ground and polished surfaces can be successfully imaged, providing a path to control SSD throughout the entire optics manufacturing process chain. Full tomograms are acquired for qualitative and quantitative analyses of both surface and SSD. The main requirements for the detection of SSD are addressed. Data processing allows the removal of low-intensity image errors and the automatic evaluation of SSD depths. OCT scans are carried out on destructively referenced glass samples and compared to existing predictive models, validating the obtained results. Finally, intensity projection methods and depth maps are applied to characterize crack morphologies. The experiments highlight differences in crack characteristics between optical glasses SF6 and HPFS7980 and illustrate that wet etching can enhance three-dimensional imaging of SSD with FF-OCT.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.