Abstract
Gel polymer electrolytes (GPEs) are considered to be one most promising alternative to liquid electrolytes due to their suitability for creating safe and durable solid-state lithium-metal batteries. However, the mechanical properties of GPEs usually deteriorate dramatically when polymer matrices are plasticized by a liquid electrolyte, which leads to significant loss of battery performance. Therefore, the long-term structural integrity and good mechanical strength are critical characteristics of GPEs designed for high-performance batteries. Here, an ecologically compatible cellulose-based GPE with a crosslinked structure is synthesized via a facile and effective thiol-ene click chemistry method. The prepared thiol-ene crosslinked GPE possesses enhanced mechanical strength (10.95 MPa) and rigid structure, which enabled us to fabricate LiFePO4|Li batteries with ultra-long cycling performance. The capacity retention of the crosslinked cellulose-based GPE can be up to 84% at 0.5 C, even after 350 cycles, which is considerably higher than that of non-crosslinked GPE for which rapid decline in capacity occurs after 200 cycles. In addition, a GPE preparation method described in this work compares favorably well with existing commercial electrolytes for lithium metal batteries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.