Abstract
ABSTRACTCrack-free (111) and (100)-textured Pb(Zr0.52Ti0.48)O3 films with thicknesses ranging from 0.25 to 2.5 μm were prepared using a methoxyethanol-based precursor solution, multiple spin-coating and multiple crystallization steps. The thickness dependence of the dielectric, ferroelectric and piezoelectric properties were investigated on both (111) and (100) oriented PZT films. In both cases, the degree of preferred orientation did not change with thickness. It is found that the dielectric constant, remanent polarization and piezoelectric coefficients (d33 and d31) increase with increasing film thickness. The (100)-textured film showed higher dielectric constant but lower remanent polarization relative to (111) textured film. 1 μm was identified to be a critical thickness that marks the change of dielectric, ferroelectric and piezoelectric behaviors as a function of thickness.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call