Abstract
Experiment and modeling analysis are performed to study the evolution dynamics due to thermomechanical coupling in cyclic phase transformation responses of a superelastic NiTi shape memory alloy rod under periodic tensile stress. Synchronized acquisition of time evolutions in temperature and stress-strain curve of the rod were realized in the frequency range of 0.0004 ~ 4 Hz (average stress rate from 0.42 MPa/s to 4200 MPa/s). Significant frequency dependent oscillations, drifts and stabilizations in the strain, temperature and stress-strain curves are quantified and the roles of thermomechanical coupling in the observed evolution dynamics of the responses are revealed. It is found that the stress-strain responses are non-isothermal over the tested frequency range and that the evolution dynamics is quite distinct from that of displacement-controlled cyclic phase transition (Yin et al., JMPS, 2014) due to the non-prescribed heat sources and the implicit nature of the response. The evolution dynamics are modelled by two coupled non-linear governing equations to obtain numerical and approximate analytical expressions of the transient and steady-state stress-strain and temperature oscillations. It is shown that, for given material and ambient properties, the thermomechanical responses under cyclic-stressing can be divided into three regions and are essentially governed by the non-dimensional time scale tp¯ and stress Δσ¯.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.