Abstract

ABSTRACTWe successfully prepared poly(methyl methacrylate) (PMMA)–graphene oxide (GO) and PMMA–GO–zinc oxide (ZnO) nanocomposites and characterized them using different techniques. The adsorption performances of the as‐prepared composites were investigated for crystal violet (CV) dye removal. The contact time as a main factor affecting the adsorption process by adsorbents was studied. Because the adsorption capacity value for CV was found to show no extensive changes after 35 min, 35 min was selected as the best contact time for our system. The adsorption results revealed that the best capacity of CV adsorption onto the PMMA–GO and PMMA–GO–ZnO nanocomposites occurred at pH 12 and 298 K. The respective entropies (−0.208 and −0.168 kJ mol−1 K−1) and enthalpies (−72.86 kJ/mol, and −55.54 kJ/mol) for PMMA–GO and PMMA–GO–ZnO and Gibbs energy revealed that the process of adsorption was exothermic. In addition, the Elovich, pseudo‐first‐order, intraparticle diffusion, and pseudo‐second‐order (four types) models were applied to our kinetic study. Our results indicate that CV adsorption onto PMMA–GO and PMMA–GO–ZnO was good with the pseudo‐second‐order (type 1) and pseudo‐first‐order models because of the low χ2 value and the high correlation coefficient value. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47495.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.