Abstract
Abstract The present study deals with a comprehensive thermodynamic and exergoeconomic modeling of a Gas Turbine (GT) power plant. In order to validate the thermodynamic model, the results are compared with one of the largest gas turbine power plants in Iran (known as Shahid Salimi Gas Turbine power plant). Moreover, a multi-objective optimization is performed to find the best design variables. The design parameters considered here are air compressor pressure ratio ( r AC ), compressor isentropic efficiency ( η AC ), gas turbine isentropic efficiency ( η GT ), combustion chamber inlet temperature ( T 3 ) and gas turbine inlet temperature (TIT). In the multi-objective optimization approach, certain exergetic, economic and environmental parameters are considered through two objective functions, including the gas turbine exergy efficiency, total cost rate of the system production including cost rate of environmental impact. In addition, fast and effective non-dominated sorting genetic algorithm (NSGA-II) is applied for the optimization purpose. The thermoenviroeconomic objective function is minimized while power plant exergy efficiency is maximized using a power full developed genetic algorithm. The results of optimal designs are obtained as a set of multiple optimum solutions, called ‘the Pareto optimal solutions’. Moreover, the optimized results are compared with the working data from the case study. These show that by selecting the optimized data 50.50% reduction in environmental impacts is obtained. Finally, sensitivity analysis of change in objective functions, when the optimum design parameters vary, is performed and the degree of each parameter on conflicting objective functions has been determined.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have