Abstract
A transparent vanadium oxide film has been one of the most studied electrochromic (EC) and Thermochromic (TC) materials. Vanadium oxide films were deposited at different substrate temperatures up to 400 °C and different ratios of the oxygen partial pressure (PO2). SEM, AFM and X-ray diffraction's results show detail structure data of the films. IR mode assignments of the films measured by IR reflection–absorbance in NGIA (near grazing incidence angle) are given. It is found that the film has V2O5 and VO2 combined structures. The films exhibit clear changes in transmittance when the environment temperature (Te) is varied, especially in the 3600–4000 cm−1 range. Applying a Te that is higher than a critical temperature (Tc) to the samples, the as-RT (room temperature) deposited film with 9% PO2 has a transmittance variation of 30%, but the films that were deposited on a heated substrate of 400 °C have little variation. There is tendency of bigger variation in transmittance for the sample deposited at a larger PO2, when it is applied by 200 °C Te.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
