Abstract
Castor oil (CO) based polyurethane (PU)– polyester nonwoven fabric composites were fabricated by impregnating the polyester nonwoven fabric in a reactive composition containing CO and diisocyanate. Composites were fabricated with two different isocyanates such as toluene-2, 4-diisocyanate (TDI) and hexamethylene diisocyanate (HMDI). Thermogravimetric analysis (TGA) studies of the composites were performed to establish the thermal stability and their mode of thermal degradation. It was found that degradation of neat PU takes place in two steps and that of polyester nonwoven fabric reinforced PU composites takes place in three steps. From the TGA thermograms, a little improvement in thermal stability incase of polyester nonwoven fabric reinforced PU composites were noticed compared to unreinforced PUs. Degradation kinetic parameters were obtained for the composites using Broido, Coats and Redfern, and Horowitz and Metzger methods. Tensile fractured composite specimens were used to analyze the morphology of the composites by scanning electron microscopic technique. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.