Abstract
The application of epoxy resins in high temperature and thermal protection fields is limited due to their low decomposition temperature and low carbon residual rate. In this paper, epoxy resin (EP)/quartz fiber (QF) ceramifiable composites were prepared using a prepreg-molding process. The thermal stability, phase change and mechanical properties after high-temperature static ablation and ceramization mechanism of EP/QF ceramifiable composites were investigated. The addition of glass frits and kaolinite ceramic filler dramatically increases the thermal stability of the composites, according to thermogravimetric (TG) studies. The composite has a maximum residual weight of 61.08%. The X-ray diffraction (XRD) results show that the mullite ceramic phase is generated, and a strong quartz diffraction peak appears at 1000 °C. The scanning electron microscope (SEM) and element distribution analyses reveal that the ceramic phase generated inside the material, when the temperature reaches 1000 °C, effectively fills the voids in composites. The composites have a bending strength of 175.37 MPa at room temperature and retain a maximum bending strength of 12.89 MPa after 1000 °C treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
