Thermal imaging from UAS for estimating crop water status in a Merlot vineyard in semi-arid conditions

Abstract

AbstractThermal remote sensing indicators of crop water status can help to optimize irrigation across time and space. The Crop Water Stress Index (CWSI), calculated from thermal data, has been widely used in irrigation management as it has a proven association with evapotranspiration ratios. However, different approaches can be used to calculate the CWSI. The aim of this study is to identify the most robust method for estimating the CWSI in a commercial Merlot vineyard using high-resolution thermal imaging from Unoccupied Aerial Systems (UAS). To that end, three different methods were used to estimate the CWSI: Jackson’s model (CWSIj), Wet Artificial Reference Surface (WARS) method (CWSIw), and the Bellvert approach (CWSIb). A simpler indicator calculated as the difference between canopy and air temperature (Tc–Ta) was the benchmark to beat. The water status of a vine cultivar with anisohydric behavior (Merlot) in a vineyard in central Spain was assessed for two years with different agroclimatic conditions. Canopy temperature (Tc) was obtained from UAS flights at 9:00 h and 12:00 h solar hour over eight days during the irrigation period (June–August), and from vines under five different irrigation treatments. Stem water potential (SWP), stomatal conductance (gs), and leaf temperature (TL) were recorded at the time of the flights and compared with the thermal indices (CWSIj, CWSIw, CWSIb) and the benchmark indicator (Tc–Ta). Results show that the simpler indicator of water stress, Tc–Ta, performed better at identifying varying levels of crop hydration than CWSIb or CWSIw at 12:00 h. Under conditions of extreme aridity, the latter indices were less accurate than the physically-based CWSIj at 12:00 h, which had the highest correlation with SWP (r = 0.84), followed by the benchmark index Tc–Ta (r = 0.70 at 12:00). Considering the current climatic trends towards aridification, the CWSIj emerges as a useful operational tool, with robust performance across days and times of day. These results are important for irrigation management and could contribute to improving water use efficiency in agriculture.