Thermal hydraulic performance of a tubular heat exchanger with in‐line perforated baffle with shutter type saw tooth turbulator

Abstract

AbstractThis experimental investigation aimed to analyze the impact of a unique design of swirl generator airflow on the performance of a tubular heat exchanger operating with axial flow. To conduct the experiment, we utilized a custom‐built apparatus containing eight sawtooth air deflectors with differing space height ratios (e/h). These deflectors were oriented in a uniform manner (shutter type) and positioned at various inclination angles. Circular baffle plates, housing these deflectors, were equidistantly spaced at different pitch ratios. The arrangement of tubes within the heat exchanger remained constant throughout the study, while the Reynolds number ranged from 16,000 to 30,000. In addition, a consistent heat flux condition was maintained on the surface of the tubes. The research outcomes indicated that incorporating a deflector baffle plate with an inclination angle of 30°, an e/h ratio of 0.4, and a pitch ratio of 1.2 led to an average increase of 1.36 in the thermal enhancement factor when compared to a heat exchanger lacking a baffle plate, tested under similar conditions.