Abstract
The Lead-bismuth cooled Fast Reactors (LFR) utilizes wrapped hexagonal fuel assemblies arranged in a honeycomb pattern. The inter-wrapper flow (IWF) between adjacent assemblies has a significant influence on the core thermal-hydraulics. In this paper, the LFR core assembly analysis model, inter-wrapper flow and heat transfer model, and multi-scale coupling analysis model were developed and were implemented into the previously self-developed subchannel-level three-dimensional thermal hydraulic analysis code CorTAF-LBE for whole core of LFR, which is based on the OpenFOAM computational fluid dynamics simulation platform. The inter-wrapper flow and heat transfer model was validated against the KALLA-IWF experiment. Whole core steady state operating condition and low flow rate condition simulations were performed with reference to the 19-rod bundle geometry from KALLA laboratory and typical LFR core assembly arrangement. The whole core steady state distribution laws of key thermal-hydraulic parameters were obtained, and the influence of low flow rate operation on safety parameters such as cladding and pellet temperatures was analyzed. Under low flow rate operating conditions, the IWF heat transfer was accounted for 4.87% of the core thermal power, which was 315.6 kW higher than that under normal operating conditions, playing an important role in core heat removal and safe operation. This work provides important insights into LFR core design and the assessment of the role of IWF under low flow rate conditions.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call