Abstract
Abstract In first wall structures of fusion reactors like ITER high dose radiation will be an important issue. At present thermal cycling is considered, beside the radiation damage, as the most detrimental lifetime limiting phenomenon for the above structure. A test method for performing uniaxial low cycle thermal fatigue tests on metals is described. The tubular specimens are thermally cycled between a fixed low temperature (200°C) and a variable high temperature (550°C to 750°C) in air atmosphere. Total mechanical strain amplitudes between 0.4% and 1.4% are evaluated in case of AISI 316L and between 0.3% and 0.5% in case of ferritic-martensitic steel. Thermal fatigue life, of both steels examined, is found to be shorter than isothermal, strain controlled fatigue life at a temperature equal to the high temperature of thermal cycling. Crack initiation occured in most cases on nonmetallic inclusions or impurities. Dislocations are of a well defined cell configuration, occupying the largest volume fraction ...
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call