Thermal conductivity, electrical resistivity, mechanical, and rheological properties of thermoplastic composites filled with boron nitride and carbon fiber

Abstract

AbstractHybrid composites consisting of boron nitride (BN) platelets and carbon fibers (CF) in a polybutylene terephthalate (PBT) matrix were melt‐compounded, and their thermal and electrical conductivity, tensile, and rheological properties were investigated. While it does not lead to an enhancement in thermal conductivity with respect to PBT/BN composites, the results indicate that a combination of BN and CF in PBT can significantly reduce electrical conductivity of the composites compared to that of PBT/CF composites. The relative low thermal conductivity of the hybrid composites is attributed to CF breakage that occurred during the extrusion and alignment of CF in melt flow direction, which is normal to the heat flow encountered during the thermal conductivity tests induced by injection molding. The hybrid composites were, however, found to have better tensile properties and processibility than PBT/BN composites at the same total filler content. POLYM. COMPOS., 26:66–73, 2005. © 2004 Society of Plastics Engineers