Abstract
AbstractThis paper discusses the effect of compression pressure on the mechanical and thermal properties of gas diffusion layers (GDL). The stress–strain curve of the GDL revealed one nonlinear and two piecewise linear regions within the compression pressure range of 0–5.5 MPa. The thermal conductivity of the compressed GDL seems to be independent of the compression pressure and was determined to be 1.18 ± 0.11 W m–1 K–1 at room temperature. The thermal contact resistance between the GDL and graphite was evaluated by augmenting experiments with computer modelling. The thermal contact resistance decreased nonlinearly with increasing compression pressure. According to the results here, the thermal bulk resistance of the GDL is comparable to the thermal contact resistance between the GDL and graphite. A simple one‐dimensional model predicted a temperature drop of 1.7–4.4 °C across the GDL and catalyst layer depending on compression pressures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.