Abstract
Thermo-chemical conversion method can transform sewage sludge (abbreviated as SS) to bio-char with hydrogen-rich gas and has good prospects for development. In this research, copper slag was used as heat carrier and provide energy for conversion process of SS. A method of carbonization-activation waste heat cascade recovery technology system was designed. In this technology process, multi-stage endothermic chemical reactions absorb sensible heat from hot copper slag particles. Syngas, activated carbon (abbreviated as AC) and char are produced from SS. Mass and energy balance of this system were evaluated. The results showed that waste heat recovery efficiency and byproducts' additional value were improved by this method comparing with traditional water quenched method. Increasing heat quantity of carbonization process can improve system's energy recovery ratio. In theory, under the optimal condition (T2 = 700 °C, T3 = 200 °C), waste heat recovery ratio and exergy recovery ratio reach 90.8% and 94.9%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.