Abstract
In this work we produced tungsten (W) and W oxide (WOx) films by pulsed laser deposition (PLD) with the aim of the addressing modifications of structure and morphology that occur after annealing treatments and high-flux deuterium plasma. Thanks to the high flexibility of PLD we produced nanostructured W containing non-bounded oxygen, different types of WOx and multilayered films. W coatings are dense, non-porous and exhibit a nanocrystalline structure, resembling the coatings used as first wall in tokamaks. The oxide films are nearly stoichiometric amorphous WOx (x=3) with different morphology from compact to porous. Depending on annealing temperature, nucleation of different crystalline phases (e.g. WO3, W18O49) occurs. Exposure of films to high-flux (∼1024m−2s−1) deuterium plasmas in Magnum-PSI at different surface temperatures (Tmax=580K) determines material modifications at the nanoscale (e.g. nanometric defects) but no delamination. In addition preliminary deuterium retention results are reported.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.