Thermal and thermomechanical properties of poly[(butylene succinate)- co-adipate] nanocomposite

Abstract

In this article the thermal and thermomechanical properties of neat poly[(butylene succinate)- co-adipate] (PBSA) and its nanocomposite are reported. Nanocomposite of PBSA with organically modified synthetic fluorine mica (OSFM) has been prepared by melt-mixing in a batch mixer. The structure of nanocomposite is characterized by X-ray diffraction patterns and transmission electron microscopic (TEM) observations that reveal homogeneous dispersion of intercalated silicate layers in the PBSA matrix. The melting behavior of pure polymer and nanocomposite samples are analyzed by differential scanning calorimetry (DSC), which shows multiple melting behavior of the PBSA matrix. The multiple melting behavior of the PBSA matrix is also studied by temperature modulated DSC (TMDSC) and wide-angle XRD (WXRD) measurements. All results show that the multiple melting behavior of PBSA is due to the partial melting, re-crystallization, and re-melting phenomena. The investigation of the thermomechanical behavior is performed by dynamic mechanical thermal analysis. Results demonstrate substantial enhancement in the mechanical properties of PBS, for example, at room temperature, storage flexural modulus increased from 0.5 GPa for pure PBS to 1.2 GPa for the nanocomposite, an increase of about 120% in the value of the elastic modulus. The thermal stability of nanocomposite compared to that of neat PBSA is also examined in pyrolytic and thermo-oxidative conditions. It is then studied using kinetic analysis. It is shown that the stability of PBSA is increased moderately in the presence of OSFM.