Abstract
This research proposes the development of polymeric composites reinforced with natural fibres to become stronger the damaged timber structures and proposes thermal and mechanical characterization of these composites. Fibres with larger structural applications are glass and carbon fibres but the use of natural fibres is an economical alternative and possesses many advantages such as biodegradability, low cost and is a renewable source. Woven sisal fabric was submitted to heat treatment before moulding and the influence of moisture content of fibres on the composites behaviour was observed. The paper presents mechanical characterization by tensile and flexural strength of woven sisal fabric composites, with and without thermal treatment (at 60°C for 72h) on the fabric, thermal characterization by TGA and the manufacturing process by compression moulding. Experimental results show to sisal/phenolic composites a tensile strength and a flexural strength value of 25.0MPa and 11.0MPa, respectively, independent to the use of sisal fibres with or without thermal treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.