Abstract
In laser dermatology, cryogen spray cooling has been used to protect the epidermis from unwanted thermal damage. In this work, spray characteristics and surface heat transfer dynamics were simulated by two-way coupling hybrid vortex method to evaluate the surface cooling capacity of R134a, R404A and R1234yf in terms of cooling density and effective heat flux. Simulation results reveal that R404A has the largest cooling capacity and smallest dispersion. R1234yf has similar spray characteristics but smaller dispersion compared with R134a. The maximum effective heat flux for R134a, R404A and R1234yf was determined as 262.1, 407.5 and 225.8 kW/m2 at the spray distances of 25.6, 30.8 and 25.1 mm, respectively. Substituting the environment friendly R1234yf for R134a can remarkably reduce global warming potential by over 1430 times and increase cooling density but insufficient cooling capacity. The effective heat flux of R1234yf can be enhanced by 18.8% by reducing the nozzle diameter and decreasing the back pressure (D = 0.4 mm, Pb = 0.01 MPa). This result is comparable with that of R134a under 1 atm and provides a theoretical basis for R1234yf potential application in clinics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
